NISCO, Inc.

Noshok 3070-MFS 1/2", MPT x FPT, 0.187" Orifice, 10000 PSI at 200 Deg F, Electropolished, 316 Stainless Steel, Threaded Bonnet, Double Block/Bleed, Hard Seat, 3-Valve, Needle Valve

MPN: 3070-MFS
List Price: $405.22
$344.45

Needle Valve | Type Double Block/Bleed, Hard Seat, 3-Valve | Nominal Size 1/2 Inch | Orifice Diameter 0.187 Inch | End Connection Male Threaded x Female Threaded | End to End Distance 4 Inch | Bonnet Type Threaded | Body Material Electropolished 316 Stainless Steel | Stem Material 316 Stainless Steel | Seal Material FKM | Handle Material Electropolished 316 Stainless Steel | Temperature Rating 200 Deg F | Pressure Rating 10000 PSI at 200 Deg F | Inclusions/Features 1-Piece Bonnet, Metal to Metal Seal | Applicable Standard NACE MR0175, ISO 15156-3

Manufacturer Catalog Page

Manufacturer Specification Sheet

Product Features / Technical Specifications
Body Material Electropolished 316 Stainless Steel
Stem Material 316 Stainless Steel
Applicable Standard NACE MR0175, ISO 15156-3
Bonnet Type Threaded
End Connection Male Threaded x Female Threaded
End to End Distance 4 Inch
Features & Benefits Combines Isolating and Venting in a Single Valve, Eliminating the Need for Tubing and Fitting | Block Valve Isolates the Downstream Process Fluids and the Bleed Valve Exhausts Upstream Fluids Enabling Instruments to be Removed without Disturbing the Permanent Piping Installation | The 1/4 Inch NPT Vent Plug is Located 90 degree to the Left and May be Removed and Replaced with Exhaust Piping to Direct the Fluids to a Safe Location | 100 Percent Helium Leak Tested to 1 x 10-4 Ml/S for Guaranteed Performance and Reliability | Blow-Out Proof Stem Provides a Secondary Stem Seal in the Full Open Position | FKM O-Ring Seal and PTFE Back-Up Ring Below the Stem Threads to Protect from Corrosion and Galling | All Stem Threads are Rolled for Strength and Ease of Operation | One-Piece Bonnet with a Metal to Metal Seal to the Valve Body Below the Bonnet Threads | Slotted Spring Pin to Prevent Accidental Loosening | Vinyl Dust Cap for Bonnet and Stem (Non-Packing) | Made in USA
Handle Material Electropolished 316 Stainless Steel
Inclusions/Features 1-Piece Bonnet, Metal to Metal Seal
Individual Item Weight 3.200 Pound
Nominal Size 1/2 Inch
Orifice Diameter 0.187 Inch
Pressure Rating 10000 PSI at 200 Deg F
Seal Material FKM
Series/Model 3070
Temperature Rating 200 Deg F
Type Double Block/Bleed, Hard Seat, 3-Valve
NISCO Inc. Line Card

Please take a moment to download and review the NISCO Inc. line card. By doing so, you will be able to view all the brands and products that NISCO Inc. distributes and/or represents.